Quote Originally Posted by jonathan.rosenberg
I know that is a very late replay, maybe someone else encounter the proble like I do
(after powering on, the camcorder power LED start to blink two times every 3 sec.)

I have a deja-vu of the "Memory Card Error" problem of my Canon S400: remove some screws, take the cover apart, do some silly thing and voila everything is working again.

It's seems that is a internal connectors problem so the camcorder will switch to "Safe mode".

So, remove the main battery and the backup battery, take the bottom cover off by removing four screws of the bottom, one on the side of the LCD screen and two of the side opposite to the LCD (the bottom screw near the "battery release" may remain in his place). Once the cover off, press gently the golden cable ribbons in the plugs (a droplet of contact oil may be very helpful also ). Reassemble and enjoy :-).



Link to the manual:
http://support.panasonic.be/shop/dat...NV-DS65_UK.pdf
Thank U !!!! This what u write very help me to repair my Panasonic NV-DS60 !!
:thumbsup:
Best Regards
Mihail Peltekov