Help Files Camera and Photography Forum

For general camera equipment and photography technique questions. Moderated by another view. Also see the Learn section, Camera Reviews, Photography Lessons, and Glossary of Photo Terms.
Results 1 to 10 of 10

Thread: Vivitar flash

  1. #1
    Firefighter Tyson L. Sparks's Avatar
    Join Date
    Jan 2007
    Location
    Newark, Ohio
    Posts
    1,613

    Vivitar flash

    Does anyone know if I can fire a vivitar 283 flash off my E500 with out hurting it?

    How can I be lost
    If I've got nowhere to go?

    Sony a55 16-50mm 2.8 ssm Minolta 50mm 70-300 dt 5.6

  2. #2
    Spamminator Grandpaw's Avatar
    Join Date
    Feb 2004
    Location
    Mississippi Gulf Coast, USA
    Posts
    4,808

    Re: Vivitar flash

    Quote Originally Posted by Tyson L. Sparks
    Does anyone know if I can fire a vivitar 283 flash off my E500 with out hurting it?
    From what I have determined , most newer cameras want a flash sync voltage around 6 volts and the Vivitar 283 is up around 300. I have three Vivitar 285 flashes and the 285 is around 220 volts. The newer Vivitar 285HV has a trigger voltage of 6 volts. To be sure I would E-Mail the manufacturer of your camera or look on their website and get a telephone number and call and ask. DO NOT TRY IT untill you find out for sure or you might fry your camera.

    I called and my Kodak P880 will take up to 500volts. Be sure and find out FIRST, Jeff
    Check out my website Here
    My Nikon D7000 Tips thread is HERE

    All images posted by me anywhere are Copyrighted by Federal Law and may not be copied or used in ANY FORM without my personal written permission. Jeff Impey
    "I decided years ago I was only going to have two types of days... Very Good Days or just Plain Good Days I just refuse to have Bad Ones!!! :thumbsup: :thumbsup:

  3. #3
    Spamminator Grandpaw's Avatar
    Join Date
    Feb 2004
    Location
    Mississippi Gulf Coast, USA
    Posts
    4,808

    Re: Vivitar flash

    I found the manual on line here

    http://www.olympusamerica.com/files/...d%20Manual.pdf

    I looked and it doesn't say about the sync voltage but if you look on page 216 it gives you a toll free number and the operation times where you can call and ask, Jeff
    Check out my website Here
    My Nikon D7000 Tips thread is HERE

    All images posted by me anywhere are Copyrighted by Federal Law and may not be copied or used in ANY FORM without my personal written permission. Jeff Impey
    "I decided years ago I was only going to have two types of days... Very Good Days or just Plain Good Days I just refuse to have Bad Ones!!! :thumbsup: :thumbsup:

  4. #4
    Firefighter Tyson L. Sparks's Avatar
    Join Date
    Jan 2007
    Location
    Newark, Ohio
    Posts
    1,613

    Re: Vivitar flash

    My 283 runs on 4 AA batteries, that makes it 6 volt right?

    How can I be lost
    If I've got nowhere to go?

    Sony a55 16-50mm 2.8 ssm Minolta 50mm 70-300 dt 5.6

  5. #5
    Spamminator Grandpaw's Avatar
    Join Date
    Feb 2004
    Location
    Mississippi Gulf Coast, USA
    Posts
    4,808

    Re: Vivitar flash

    Quote Originally Posted by Tyson L. Sparks
    My 283 runs on 4 AA batteries, that makes it 6 volt right?

    NO NO NO NO NO !!!! My 285 runs on the same four AA batteries but the voltage it sends out to the camera is 220 volts. Look at the address I have below and it will tell you more about your flash, Jeff

    http://www.acecam.com/photography/2108.html
    Check out my website Here
    My Nikon D7000 Tips thread is HERE

    All images posted by me anywhere are Copyrighted by Federal Law and may not be copied or used in ANY FORM without my personal written permission. Jeff Impey
    "I decided years ago I was only going to have two types of days... Very Good Days or just Plain Good Days I just refuse to have Bad Ones!!! :thumbsup: :thumbsup:

  6. #6
    Senior Member mn shutterbug's Avatar
    Join Date
    Jun 2007
    Location
    SW MN
    Posts
    2,386

    Re: Vivitar flash

    You can fire any flash from your camera, if you use it off camera with a slave. You can attach a flash bracket to your camera and mount a slave to the bracket and a flash on top of that. This way, when your camera flash fires, the slave will set off the other flash.
    Mike
    www.specialtyphotoandprinting.com
    Canon 30D X 2, Canon 100-400L, Thrift Fifty, Canon 18-55 IS 3rd generation lens plus 430 EX II flash and Better Beamer. :thumbsup:

  7. #7
    Firefighter Tyson L. Sparks's Avatar
    Join Date
    Jan 2007
    Location
    Newark, Ohio
    Posts
    1,613

    Re: Vivitar flash

    I can't get my shutter speed up above 1/100 with my on board flash up. I need it up higher than that so I can shoot nigh sports. I don't have the money to buy an olympus flash right now.

    How can I be lost
    If I've got nowhere to go?

    Sony a55 16-50mm 2.8 ssm Minolta 50mm 70-300 dt 5.6

  8. #8
    Senior Member freygr's Avatar
    Join Date
    Feb 2005
    Location
    Portland, OR, USA
    Posts
    2,522

    Re: Vivitar flash

    Check in you camera's manual. The trigger voltage and current either can damage your camera if the flash circuit is not designed for the voltage or the current needed to fire a flash bulb. Flash tubes work by discharging a high voltage capacitor through the flash tube. The trigger is a small value high voltage capacitor discharging through a transformer ( like your automotive spark coil) to start the discharge by ionizing the gas in the flash tube. The voltages in the flash start about 200 volts and goes up to 1K volts in studio units. The old portable professional flashes took two 500 volt batteries.
    GRF

    Panorama Madness:

    Nikon D800, 50mm F1.4D AF, 16-35mm, 28-200mm & 70-300mm

  9. #9
    Spamminator Grandpaw's Avatar
    Join Date
    Feb 2004
    Location
    Mississippi Gulf Coast, USA
    Posts
    4,808

    Re: Vivitar flash

    Quote Originally Posted by mn shutterbug
    You can fire any flash from your camera, if you use it off camera with a slave. You can attach a flash bracket to your camera and mount a slave to the bracket and a flash on top of that. This way, when your camera flash fires, the slave will set off the other flash.
    There are a couple of reasons I didn't mention getting a slave trigger for this flash. 1st depending on how important these shots are to you and if you are the only one shooting using a flash you could have problems. With the older flash you have it takes several seconds to recycle for another shot. If someone else uses a flash before you shoot your flash could accidently be triggered and you would have to wait several seconds before your able to get your shot.

    2nd some cameras send out a series of pre-flashes and your own camera could trigger the external flash too early. Some of the newer flashes can be programed for preflashes so the built in flash on your camera won't set the slave flash off but the Vivitar 283 is not one of them.

    I think you can experiment with it but to have something you can count on, purchasing a new flash is the better option. Your camera will only sync with a flash up to 1/180 or lower. Hope this helps, Jeff
    Check out my website Here
    My Nikon D7000 Tips thread is HERE

    All images posted by me anywhere are Copyrighted by Federal Law and may not be copied or used in ANY FORM without my personal written permission. Jeff Impey
    "I decided years ago I was only going to have two types of days... Very Good Days or just Plain Good Days I just refuse to have Bad Ones!!! :thumbsup: :thumbsup:

  10. #10
    has-been... another view's Avatar
    Join Date
    Jan 2003
    Location
    Rockford, IL
    Posts
    7,649

    Re: Vivitar flash

    There is a product called the Wein Safe Sync, which is a small box that goes between the camera and flash for just this purpose. However, they're garbage. Bought one, didn't work. Called the factory and asked for a replacement and it didn't work either. Apparently that's pretty common. If I ever did get one that worked, chances are it wouldn't last long anyway.

    Optical slaves can be a bit touchy and will probably never work 100% as you'd hope. They'll also be set off by somebody else's flash. But it is an option...

    Absolutely, without a doubt, do not try this until you figure out for sure what sync voltage your camera can handle.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •