• 06-18-2004, 08:32 PM
    triphop
    Memory Card Transfer Problem
    Hoping someone may have had his happen and can shed some light on this...

    I reformatted my Lexar 40X memory card, shot 148 raw images, turned off my camera and removed the card as usual. Uploaded the images to my Mac. Upon transfer the system showed that there were 308 images on the card, which there should not have been. After the transfer I was able to only view a few images, while all the rest are unrecognized formats. I put the card back into my camera to review the images, but the camera then displayed that there are no images on the card. I have not had this happen using my other two cards, while using the same methods.

    Has anyone else experienced something similar? Just a bad card? Any way to recover the images from my system?

    If it mattters, I am using a Lexar 40X 1 GB card w/ a Lexar card reader, Nikon D2H camera, and a Mac system.

    Thanks for any help!
  • 06-20-2004, 10:04 PM
    harry12
    Quote:

    Originally Posted by triphop
    Hoping someone may have had his happen and can shed some light on this...

    I reformatted my Lexar 40X memory card, shot 148 raw images, turned off my camera and removed the card as usual. Uploaded the images to my Mac. Upon transfer the system showed that there were 308 images on the card, which there should not have been. After the transfer I was able to only view a few images, while all the rest are unrecognized formats.
    =snip=
    Has anyone else experienced something similar? Just a bad card? Any way to recover the images from my system?

    If it mattters, I am using a Lexar 40X 1 GB card w/ a Lexar card reader, Nikon D2H camera, and a Mac system.

    Thanks for any help!

    =======================

    Saw this on dpreview.com - dunno if it can apply to your setup or not?

    "Lexar has recently identified a rare compatibility issue
    between some of their 32x and 40x Professional Series
    CompactFlash cards and Nikon D1x & D1h cameras."

    .
  • 06-20-2004, 10:09 PM
    Sebastian
    Triphop,

    Did you format in camera or using your Mac?

    Yes, you can recover the images using the Photorescue software that came with the Lexar.